EPG

From wiki.jriver.com
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

An EPG (Electronic Program Guide) provides a schedule of shows for each TV channel. MC can read XMLTV data files. MC17 now provides a semi-automated way of creating and populating an EPG. This is partly based on mc2xml. It is no longer necessary to install this separately.

Pre MC17

For those of you with a version prior to MC17, these are the instructions for installing mc2xml:

You can add an EPG to J. River Media Center. Here are the steps:

1. Download mc2xml

2. Unpack it by running it. Save it anywhere, but remember the location.

3. In MC, under Drives & Devices > Television, choose Configure/Load Program Guide

4. Follow the on-screen instructions until you see this screen:

Epg setup.jpg

5. On that screen, enter the location of the mc2xml.exe file, your country, postal code, and choose "standard" for data source.

6. When you choose Next, the mc2xml file will get data from the Internet. After it finishes, you will see this screen:

Epg setup2.jpg

7. This screen lets you choose an EPG channel for each channel in MC. One, at a time, click in the second column, next to the channel you wish to change.

Once you've finished this, you should see the schedule for each channel.

MC17 EPG

For those of you with MC17, there is now a semi-automated process.

Basic Guide Set-up

1. In the left pane in Standard View, select Drives & Devices > Television

2. Select "TV Options" at the bottom left of the main pane. Select "Load Program Guide".

Load program guide.jpg

3. Select the default option - "Download EPG automatically (recommended)" and select your Country, Postal Code and the Provider of the EPG data. The Provider needs to be chosen depending on the type of tuner you are using. The options offered will have been selected based on your location. Now click "Next".

Channel match.jpg

4. The Load Program Guide channel matching window will pop up. The purpose of this step is to match the channels you have found during the scan to the channel names used in the guide data. Some names will match automatically. If you see "(click here to configure") against a Channel name, a match was not found. This may be because the names differ slightly or there is no guide data available for this channel from the Provider.

5. Near the top of the window is an Auto Match button. At the time of writing, it is unclear whether it is necessary to click this button. If you do, you will be asked: "If an identifier is already associated with a channel, do you want to keep the existing identifier or use the newly matched identifier?" Imagine you had set up the guide but had a number of channels where no guide data was found. If you run the process again with a different Provider, you might find the data available. In order that you don't change the associations you already have, choose "Keep Existing". If this is the first time you have run the process, choose "Use New".

6. For each channel where it says "(click to configure)", click on that text and search down the list which pops up and select a channel name which you believe ties up with the scanned channel.

Channel Match 2.jpg

When you have completed this for each missing match, click "Next".

7. Make sure that the check box next to the "Automatically load" option is checked. This will ensure that your EPG is kept up to date. Click "Finish".

You will now see the EPG load then the guide data will show in the pane against the channels.

Now that the EPG is set up, your TV channels will show in Theater View under Video > Guide.

Advanced Guide Set-up

The standard guide feature provides only one way of selecting channels using the Favorites marking in the "Edit Channel List" option. A number of users felt some more flexibility was required to have multiple Guide listings with particular types of channels such as Radio and TV or Sports or Kids. In order to achieve this, a new field was added and some work is required by the user. Don't be put off! Taken step by step this is achievable by any user and the results are well worth the effort.

Channels are simply database records, just like audio and video files.  This means it's possible to tag them like anything else. The idea is to tag channels with keywords.  You can give any channel any number of keywords.  Imagine tagging your favorite channels with 'Favorites', music channels with 'Music', and your kids' channels with 'Kids'.

Then, you could configure the television guide to show only entries for a particular keyword.  So on the top roller inside Guide in Theater View, you could have 'All', 'Favorites', 'Music', 'Kids', etc.

If you play from one of those views, only the channels in the view will be in the channel up / channel down queue.  In other words, if you play from the 'Favorites' list, channel up and channel down will only loop your favorite channels.

So, to set this up, follow these steps:

1. Create a Smartlist of the scanned TV Channels. If you haven't done the channel scan yet, go to the instructions in Television. If you created the TV Channels Smartlist there, ignore this step. Right click on Playlists in the left pane of Standard View and select "Add Smartlist". Name it, e.g. TV Channels and, under Rules, set Media Type is TV. Remember to uncheck Audio which is the default. Now all your channels will be listed in the main pane. To make sure your smart list is setup correctly, you can check the "Filename" for each entry. They have filename extension "tvlb". The filenames all begin with "TV Channel" and ends with "([tuner type])", like

"TV Channel xxxxxxxxxx (ATSC).tvlb" "TV Channel xxxxxxxxxx (Set Top Box).tvlb"

2. Right click on the fields title bar and check "Keywords" so that this field will show in the list.

3. Choose a name for the Guide listing you require. Suppose it is Movies. Scroll down the channel list and decide which channels you want in this Guide. Hold the CTRL key and click on each of these channels to select them. Point to the Keywords field for any of the selected channels and right click and select "Rename". A pop-up containing a field labelled "Add". Type Movies in this field. Hit Return and Movies will appear in the list box below with a check mark. Hit Return again and now Movies should show in all channels selected.

4. Repeat step 3 for all other Guide types you want. It is possible to have more than one Keyword for any channel so that channel will appear in each nominated Guide.

5. We now need to set up Theater View so that these guides are included. In Tools > Options > Theater View > Items to Show, scroll down to Video > Guide and click on Guide. Click "Add" then "Library Item". Name it 'Movies' or whatever you want your new guide to be called.

6. Click 'Set rules for file display...' and click "Import/Export". Copy and paste this rule into the box - (thanks Matt):

[TVTime]=#TVGuideStartDate-7d [=TVInfo(ChannelKeywords)&DataType=[list]]=[Movies]

Click "OK". Two custom rules will have been set up. Click "Apply" then "OK".

In the rule above, replace Movies with the Keyword you have used to identify the channels you want included in this Guide.

7. Repeat steps 5. and 6. for each of the Guides you want - one for each different Keyword.

8. In Theater View, navigate to your new view.  Use More > Toggle List Style to find the style you prefer (grid, list, etc.).

Now you have your own set of personalised EPGs.

Remember that only channels which have a XMLTV ID associated with them will show up in your guides.

Including a Clock on the Guide Page

It is useful to have a clock displayed when making decisions related to the Guide. Unfortunately, the current Guide page does not show a clock. This can be resolved by making a change to the Theater View Skin definition. If you have already customised your skin, the change is simple. If not, you will need to create your own Skin folder.

  1. Check which Theater View skin you are using - go to Tools > Options > Theater View > Appearance > Skin. Remember the name.
  2. In Windows Explorer, find Program Files\J River\Media Center 17\Skins\Theater View. You should see a folder with the name of your current skin. Copy and paste this folder into the Theater View folder and rename it with a name of your choice.
  3. Open the folder and find the main.xml file. If you are familiar with editing XML files, you may wish to use an XML editor, otherwise open it with Notebook. Near the top of the file, you will see an entry beginning with <SKIN Name=. Change the name in quotes to the name you chose for your skin.
  4. Near the bottom of the file you may find an entry beginning with <TEXT>. If so, insert this line just above the </TEXT> label (Thanks Sean):
   <Item Text="[Time]" Location="***" TextColor="ffffff" Rect="72,00,96,05" Capitalization="0" Alignment="1" Alpha="50" Size="[Large Text Height]" /> 
  1. If there is no existing <TEXT> entry, insert the following 3 lines immediately beforethe line containing </MJFS>
 <TEXT>
   <Item Text="[Time]" Location="***" TextColor="ffffff" Rect="72,00,96,05" Capitalization="0" Alignment="1" Alpha="50" Size="[Large Text Height]" />  
 </TEXT>
  1. In Theater View Guide, you should now see a clock in the top right corner.

EPG for Australia

There are useful discussions on this here on Interact. And again here and here.

More

Television

TV Shows - Series, Seasons & Episodes