WASAPI: Difference between revisions

From wiki.jriver.com
Jump to navigation Jump to search
No edit summary
No edit summary
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{See also|Audio Setup|Audio Output Modes}}
{{See Also
| relatedPage=[[Audio Setup]]}}


WASAPI is Microsoft's most modern method for talking with sound devices. WASAPI stands for Windows Audio Session API. It is available in Windows Vista, Windows 7, and newer. It allows delivering an unmodified bitstream to a sound device.
The [http://msdn.microsoft.com/en-us/library/windows/desktop/dd371455%28v=vs.85%29.aspx Windows Audio Session API (WASAPI)] is Microsoft's most modern method for talking with audio devices. It is available in Windows Vista, Windows 7, and later versions of Windows. It allows delivering an unmodified bitstream to a sound device, and provides benefits similar to those provided by [[ASIO]] drivers. One of the other main benefits of WASAPI is that it provides applications with [[exclusive access]] to audio devices, bypassing the system mixer, default settings, and any typically any effects provided by the audio driver. WASAPI is the recommended [[Audio Output Mode]] for Windows ''unless'' your audio device has a well-behaved [[ASIO]] driver, and it effectively replaces all legacy output modes including [[Kernel Streaming]] and [[Direct Sound]].


WASAPI support was first added to Media Center 13. Media Center 15 added event style WASAPI support.
WASAPI support was first added to Media Center 13. Media Center 15 added event style WASAPI support, and MC 18 made this the default.


== WASAPI Device Settings ==
For XP, [http://wiki.jriver.com/index.php/ASIO ASIO] is similar.


You can access WASAPI's Device Settings in Media Center via:
An Interact thread on the original creation of WASAPI can be found here:
<span style="color:#8B4513">Tools > Options > Audio > Audio Device > Device settings</span>
http://yabb.jriver.com/interact/index.php?topic=48478.0


[[File:MC19-Audio-WASAPI Device Settings.png|thumb|600px|none|Options available for WASAPI connected devices.]]
==WASAPI Modes==


From here you can:
There are two main ways to communicate using WASAPI. Both deliver the same audio data and will sound the same. One may work better with specific hardware.
* Enable [[Exclusive access]] of the audio device.
* Disable [[WASAPI Event Style]] for supporting older hardware.
* Set Media Center to [[Maximize device volume|automatically maximize the audio device's system volume control]] during playback.
* Alter Buffering settings if needed to deal with troublesome hardware or drivers.
* Enable the Play a little silence option which can help prevent clicks and pops when starting and stopping playback that occurs on some audio devices


== More ==
'''Terminology Changes IN 18.0.183 and Above'''


* An [http://yabb.jriver.com/interact/index.php?topic=48478.0 Interact thread on the original creation of WASAPI]
WASAPI is now just WASAPI. In the options (next item below the selection) you can check "Disable event style..." to get the output mode previously called "WASAPI", used mainly with older hardware. In other words, WASAPI now defaults to Event Style.


[[Category:Frequently Asked Questions]]
'''Versions prior to 18.0.183'''
[[Category:Audio]]

WASAPI output mode pushes data from Media Center to the sound device. It works with nearly all hardware.

WASAPI Event Style lets a sound device pull data from Media Center. This method is not supported by all hardware, but is recommended when supported.

This has several advantages:
* It lets the audio subsystem pull data (when events are set) instead of pushing data to the system. This allows lower latency buffer sizes, and removes an unreliable Microsoft layer documented below.

* It creates, uses, and destroys all WASAPI interfaces from a single thread.

* The hardware (or WASAPI interface) never sees any pause or flush calls. Instead, on pause or flush, silence is delivered in the pull loop. This removes the need for hacks for cards that circle their buffers on pause, flush, etc. (ATI HDMI, etc.).

* It allows for a more direct data path to the driver / hardware.

* The main 'pull loop' uses a lock-free circle buffer (a system that J. River built for ASIO), so that fullfilling a pull request is as fast as possible.

==Problems==

'''Stuttering'''

Some devices (most commonly USB DAC's) will start stuttering during playback when using WASAPI. This is due to a bug in Microsoft's WASAPI system itself, or in the stock Microsoft driver, where the circling buffers get out of order. Stopping and restarting playback is required to reset the stuttering.

Using '''WASAPI - Event Style''' will fix this problem. (WASAPI in 18.0.183 or above)

There are more details here:
http://yabb.jriver.com/interact/index.php?topic=59460.0


'''Hiccups using WASAPI - Event Style'''

The default buffering value for WASAPI is 100ms. With some hardware, and especially USB DAC's, a larger value is necessary. If you hear hiccups, select a larger value for buffering in Options > Audio > Output mode settings...


'''Playback won't start or playback stalls'''

Some hardware is very demanding about buffer sizes. You may need to experiment with different buffering values using Options > Audio > Output mode settings...

[[Category: Frequently Asked Questions]]

Latest revision as of 06:13, 17 April 2014

The Windows Audio Session API (WASAPI) is Microsoft's most modern method for talking with audio devices. It is available in Windows Vista, Windows 7, and later versions of Windows. It allows delivering an unmodified bitstream to a sound device, and provides benefits similar to those provided by ASIO drivers. One of the other main benefits of WASAPI is that it provides applications with exclusive access to audio devices, bypassing the system mixer, default settings, and any typically any effects provided by the audio driver. WASAPI is the recommended Audio Output Mode for Windows unless your audio device has a well-behaved ASIO driver, and it effectively replaces all legacy output modes including Kernel Streaming and Direct Sound.

WASAPI support was first added to Media Center 13. Media Center 15 added event style WASAPI support, and MC 18 made this the default.

WASAPI Device Settings

You can access WASAPI's Device Settings in Media Center via: Tools > Options > Audio > Audio Device > Device settings

Options available for WASAPI connected devices.

From here you can:

More