Difference between revisions of "DTS WAV"

From JRiverWiki
Jump to: navigation, search
Line 1: Line 1:
DTS (Digital Theater Systems) is a multi-channel surround sound format that is often found in movie soundtracks (on both Film and DVD) and is used for multi-channel sound on laser discs and even some CDDAs.  It is similar to Dolby System's AC3 format (it's chief competitor in the cinema and home theater market), and they are similar in terms of audio performance.  More about the format can be found on [http://en.wikipedia.org/wiki/Digital_Theater_System Wikipedia's DTS page].
+
DTS (Digital Theater Systems) is a multi-channel surround sound format that is often found in movie soundtracks and is used for multi-channel sound on film, DVD, laser discs, and even some CDDAs.  It is similar to Dolby System's AC3 format (it's chief competitor in the cinema and home theater market), and they are similar in terms of audio performance.  More about the format can be found on [http://en.wikipedia.org/wiki/Digital_Theater_System Wikipedia's DTS page].
  
 
Enabling support for Wave files (WAV) containing DTS Audio streams in MC takes quite a bit of configuration, but you can get it to work with a little bit of effort.  These instructions are focused on having the computer decode the DTS stream itself, and output the audio through your sound card's analog outputs directly (which is honestly what most normal users will probably want).
 
Enabling support for Wave files (WAV) containing DTS Audio streams in MC takes quite a bit of configuration, but you can get it to work with a little bit of effort.  These instructions are focused on having the computer decode the DTS stream itself, and output the audio through your sound card's analog outputs directly (which is honestly what most normal users will probably want).

Revision as of 14:59, 20 March 2007

DTS (Digital Theater Systems) is a multi-channel surround sound format that is often found in movie soundtracks and is used for multi-channel sound on film, DVD, laser discs, and even some CDDAs. It is similar to Dolby System's AC3 format (it's chief competitor in the cinema and home theater market), and they are similar in terms of audio performance. More about the format can be found on Wikipedia's DTS page.

Enabling support for Wave files (WAV) containing DTS Audio streams in MC takes quite a bit of configuration, but you can get it to work with a little bit of effort. These instructions are focused on having the computer decode the DTS stream itself, and output the audio through your sound card's analog outputs directly (which is honestly what most normal users will probably want).

If instead you want to simpy pass the DTS stream through a S/PDIF output to an external DTS decoder box, this should also be possible with slight modifications to this method. However, this is untested and may not work at all!


Required Additional Software

DTSWav Source Plugin from Hypercubemx

FFDSHOW DirectShow Filter: Installing through CCCP is recommended.


Setup Instructions

  1. Make sure you've installed CCCP carefully using the instructions provided on the CCCP FAQ page.
  2. Download the DTSWav Source Plugin from Hypercubemx and extract the contents of the archive file to a folder on your hard drive. A good location for this is: C:\Program Files\DirectShow Filters\DTSWav\ but you can put it wherever you'd like.
  3. Register the DTSWave Source Filter. Go to Start --> Run and type:
    regsvr32 "C:\Program Files\DirectShow Filters\DTSWav\DTSWAVSource.ax"
  4. Open the FFDSHOW Audio Decoder Configuration. Go to Start --> Programs --> Combined Community Codec Pack --> FFDShow Audio Decoder Configuration
  5. Navigate to the Codec Configuration section of FFDSHOW using the navigation "tree" on the left.
  6. In the codec list on the right, select DTS and ensure that libdts is chosen.
    1. Also ensure that Check For DTS in WAV is selected at the bottom of the dialog.
    2. If you want to use S/PDIF passthrough, you would select spdif instead of libdts here.
    Ffdshow codec-dts.jpg
  7. Scroll down in the codec list and find Uncompressed. Change it from disabled to all supported.
    Ffdshow codec-uncompressed.jpg
  8. Next, still in the FFDSHOW audio decoder tool, select Dolby Decoder from the navigation "tree" and enable it.
    1. If you will be using an external DTS decoder (via S/PDIF output) then do not enable this option.
    Ffdshow dolby decoder.jpg
  9. Take your WAV files containing DTS Audio streams, and change the file extension to .dtswav as recommended by the DTS Wav plugin authors.
  10. You should now be able to play the files back using a DirectShow player. Try playing one of them back using Windows Media Player or Media Player Classic (which is installed as part of CCCP). If the files don't play back or you hear static, you likely did something wrong so check your previous steps.
  11. Import the files into MC by right clicking on the files in Windows Explorer and choosing Media Center --> Import. They will import as Data files. You can also drag-drop the files from Windows Explorer into the MC window.
  12. Find them in MC. Manually change the following attributes:
    1. File Type: change from "dtswav" to "dts"
    2. Media Type: change from "data" to "audio"
  13. Inside MC, go to Options --> Playback --> DirectShow playback Settings --> DirectShow Filters and make sure DTS is checked.

That's it! The files should now play and act just like any other Audio file in MC.

A few little important notes:

  • You must use the .dtswav extension for the files or the DTSWav Source Filter won't "see" them.
  • You must change the file type from dtswav to dts in MC for each file, or MC will fail to play them back.