Difference between revisions of "DLNA"

From JRiverWiki
Jump to: navigation, search
Line 1: Line 1:
'''Introduction'''
+
== Introduction ==
  
 
DLNA is a protocol for sharing media among devices in a home.  Beginning at about build 100 of J. River Media Center 14, [http://www.dlna.org/home DLNA] support began to be more complete.  In most case, you will only need to set the DLNA / UPnP Server to "Generic DLNA".  XBox and PS3 are exceptions.
 
DLNA is a protocol for sharing media among devices in a home.  Beginning at about build 100 of J. River Media Center 14, [http://www.dlna.org/home DLNA] support began to be more complete.  In most case, you will only need to set the DLNA / UPnP Server to "Generic DLNA".  XBox and PS3 are exceptions.
Line 5: Line 5:
 
DLNA is a super-set of UPnP.   
 
DLNA is a super-set of UPnP.   
  
 +
== Terminology ==
  
 
'''DLNA Terminology'''
 
'''DLNA Terminology'''
Line 30: Line 31:
  
  
'''Hardware Known to Work'''
+
== Hardware Known to Work with MC ==
  
 
A list of [http://yabb.jriver.com/interact/index.php?topic=55379.0 DLNA TV's]
 
A list of [http://yabb.jriver.com/interact/index.php?topic=55379.0 DLNA TV's]
Line 37: Line 38:
  
  
'''Setup Instructions'''
+
== Setup Instructions ==
  
MC 14.0.127 introduced a DLNA renderer and controller, in addition to the previously existing DLNA Server (formerly known as the UPnP Server).
+
MC 14.0.127 introduced a DLNA renderer and controller, in addition to the previously existing DLNA Server (formerly known as the UPnP Server). The controller can play media from the DLNA server to another copy of MC or to a device.
 
 
The controller can play media from the DLNA server to another copy of MC.
 
 
 
To set it up
 
  
 
1.  In MC's Tools/Options/DLNA, turn on the functions you need in each copy of MC.  Normally, this would be the controller and server on the machine you're playing from, and the renderer on the machine you're playing to.
 
1.  In MC's Tools/Options/DLNA, turn on the functions you need in each copy of MC.  Normally, this would be the controller and server on the machine you're playing from, and the renderer on the machine you're playing to.
Line 51: Line 48:
 
3.  Start the copy that is running the controller and server.  In a minute or two, it will show any renderers it finds under Playing Now.  Click on the one you want.  Then drag a file to it.  This should play on the remote device.
 
3.  Start the copy that is running the controller and server.  In a minute or two, it will show any renderers it finds under Playing Now.  Click on the one you want.  Then drag a file to it.  This should play on the remote device.
  
 +
== Using DLNA ==
  
 
'''Finding DLNA Renderers and Servers'''
 
'''Finding DLNA Renderers and Servers'''
  
'''Media Renderers''' will appear under Playing Now (as zones) about 30 seconds after MC is started.  When one is selected, any playback will be sent to it.
+
'''Media Renderers''' will appear under Playing Now as zones about 30 seconds after MC is started.  In the screenshot below, the WDTV Live and the Streamium are renderers, and Zone 1 is the local machine.  When a renderer is selected, any playback will be sent to it.
  
 
[[Image:DLNA1.jpg]]
 
[[Image:DLNA1.jpg]]

Revision as of 09:50, 1 February 2010

Introduction

DLNA is a protocol for sharing media among devices in a home. Beginning at about build 100 of J. River Media Center 14, DLNA support began to be more complete. In most case, you will only need to set the DLNA / UPnP Server to "Generic DLNA". XBox and PS3 are exceptions.

DLNA is a super-set of UPnP.

Terminology

DLNA Terminology

1. DMS -- Digital Media Server -- where the media resides

2. DMP -- Digital Media Player -- where the media is played

3. DMR -- Digital Media Renderer -- where media is played, but with ability to respond to a controller

4. DMC -- Digital Media Controller -- software control of the renderer -- functions as a remote


UPnP Terminology (similar)

1. A Device (a server)

2. A Renderer (the client)

3. A Control Point (something like a remote control)

Our UPnP Server is a "Device" (#1 above).

More information on UPnP can be found in the article on UPnP Server.


Hardware Known to Work with MC

A list of DLNA TV's

A list of DLNA Boxes


Setup Instructions

MC 14.0.127 introduced a DLNA renderer and controller, in addition to the previously existing DLNA Server (formerly known as the UPnP Server). The controller can play media from the DLNA server to another copy of MC or to a device.

1. In MC's Tools/Options/DLNA, turn on the functions you need in each copy of MC. Normally, this would be the controller and server on the machine you're playing from, and the renderer on the machine you're playing to.

2. Start the copy of MC that is running the renderer.

3. Start the copy that is running the controller and server. In a minute or two, it will show any renderers it finds under Playing Now. Click on the one you want. Then drag a file to it. This should play on the remote device.

Using DLNA

Finding DLNA Renderers and Servers

Media Renderers will appear under Playing Now as zones about 30 seconds after MC is started. In the screenshot below, the WDTV Live and the Streamium are renderers, and Zone 1 is the local machine. When a renderer is selected, any playback will be sent to it.

DLNA1.jpg

Two DLNA Servers are shown in the list below (from MC/File/Library). Selecting one will open it as a library in MC.

The Buffalo Linkstation shown is a NAS drive that includes a DLNA Server. Any media moved to the drive will automatically show up in the MC library after the library is opened.

DLNA2.jpg

Support Thread on Interact