DAC Settings: Difference between revisions

From wiki.jriver.com
Jump to navigation Jump to search
Line 49: Line 49:
::Right-click on your DAC and select "Associate with DLNA Server".
::Right-click on your DAC and select "Associate with DLNA Server".
::Choose the "Audiophile 24-bit DAC" choice from the list.
::Choose the "Audiophile 24-bit DAC" choice from the list.
::Normally you shouldn't need to modify the DLNA Controller Options.
::Normally you shouldn't need to modify the items under "DLNA Controller Options".
'''More DLNA information here...'''
'''More DLNA information here...'''
*[http://wiki.jriver.com/index.php/DLNA General DLNA setup information]
*[http://wiki.jriver.com/index.php/DLNA General DLNA setup information]

Revision as of 15:28, 9 September 2013

Media Center has industry leading support for high-end DACs (Digital to Analog Converters).

Note that the setup is completely different for directly connected DAC's (e.g. USB, S/PDIF) vs. network connected DAC's (e.g. DLNA over ethernet). Please use the appropriate section below for setup.


Recommended Settings (DAC's with direct USB or S/PDIF connection)

For the best quality playback with high-end DACs, use these recommended settings:

Options > Playback > Audio > Output Mode

Media Center Windows
You will need to select the best audio output mode for your device in Options > Audio.
With Media Center Windows version 15 and above, use "WASAPI - Event Style".
With older versions of Media Center Windows, use "WASAPI".
Note that some DACs listed below offer native ASIO drivers that may be better than WASAPI.
Media Center Mac
Use "Core Audio".

Options > Playback > Audio > Output mode settings...

Media Center Windows
Inside "Output mode settings..." for WASAPI, use the following settings:
Open device for exclusive access: Checked
Present 24-bit data in a 32-bit package: Unchecked
Buffering: 100ms (assuming WASAPI - Event Style). If you hear audio hiccups or drop-outs, increase this size.

DSP Studio > Output Format

You will also need to choose the output format using DSP Studio. These settings are recommended:

Bitdepth: 24-bit (most DACS prefer and even require 24-bit input)

Channels: Source number of channels

Sample rate: Depends (with an outboard DAC, try "Source sample rate")

Recommended Settings (DAC's connected via DLNA over network)

Make sure there is a "Audiophile 24-bit DAC" DLNA server available in Media Center

Go to Tools / Options / Media Network and click on "Add or configure DLNA server...".
If there is no "Audiophile..." option in the server list at the top, click the "Add..." button and select it from the choices.
When the "Audiophile 24-bit DAC" server is highlighted, you can configure the options in the lower window. Normally, you'll just be configuring the Audio section.
The "Mode:" should normally be "Specified output format".
The "Format:" should normally be set to "PCM 24 bit".
Under "Advanced" it should normally have "Stereo downmix" checked, and "Sample rate:" should be "Same as source".

Associate your DAC with the "Audiophile 24-bit DAC" server configured above

Find your DAC under "Playing Now" in the left tree view in Media Center.
Right-click on your DAC and select "Associate with DLNA Server".
Choose the "Audiophile 24-bit DAC" choice from the list.
Normally you shouldn't need to modify the items under "DLNA Controller Options".

More DLNA information here...

Known to Work With

  • Audio Research DAC8. Install Audio Research's DAC8 drivers (ASIO) on the PC, and select ASIO in MC15, then select the DAC8.
  • PS Audio PWD
  • Arcam RDAC
  • HRT Music Streamer II

More Information

Related topic: Audiophile Info

Related topic: Audio Output Modes