Audio Setup: Difference between revisions

From wiki.jriver.com
Jump to navigation Jump to search
No edit summary
 
(9 intermediate revisions by 2 users not shown)
Line 35: Line 35:
* [[Audio Output Modes]]
* [[Audio Output Modes]]


If you aren't sure what to use, try the ''Direct Sound'' version first, and after you get that working well, you can explore other options.
If you aren't sure what to use, try the ''Direct Sound'' version (on Windows) or the CoreAudio version (Mac OSX) first, and after you get that working well, you can explore other options.


=== Other Audio Options ===
=== Other Audio Options ===
Line 51: Line 51:
=== Output Encoding ===
=== Output Encoding ===


For most users, this should be set to ''None''. If you have an external DAC that will do further processing, you can enable formatting options here for compatibility with your specific device.
For most users, this should be set to ''None''. If you have an external DAC that will do further processing, and which ''requires'' a specific input type, you can enable formatting options here for compatibility with your specific device.

:'''''Note''''': If set to something other than ''None'', this will re-encode '''all''' audio output by Media Center to the format selected. If you are trying to pass specific audio formats through directly to an external DAC, this is not the correct setting. That setting is called Bitstreaming and is set in <span style="color:#8B4513">Tools > Options > Audio > Settings</span>.


=== Sample rate ===
=== Sample rate ===
Line 79: Line 81:
== Troubleshooting ==
== Troubleshooting ==


If your test fails, but you are able to play the test sounds via the Windows Sound Control Panel (referenced above), refer to the [[Audio Troubleshooting Guide]] for further assistance. You can also ask for help on our [http://yabb.jriver.com/interact/ Interact forum].
If your test fails, but you are able to play the test sounds via the Windows Sound Control Panel or OSX Sound System Preferences panel (referenced above), refer to the [[Audio Troubleshooting Guide]] for further assistance. You can also ask for help on our [http://yabb.jriver.com/interact/ Interact forum].


== Refining Audio Settings ==
== Refining Audio Settings ==
Line 103: Line 105:
* [[Audiophile Info]]
* [[Audiophile Info]]
* [[Mixing]]
* [[Mixing]]
* [[DSD]]



[[Category:Frequently Asked Questions]]
[[Category:Frequently Asked Questions]]
Line 108: Line 112:
[[Category:Setup]]
[[Category:Setup]]
[[Category:Tutorials]]
[[Category:Tutorials]]
[[Category:DSD]]

Latest revision as of 13:42, 20 September 2021

This guide provides an overview of how to configure audio playback in JRiver Media Center. Please follow the steps below in order.

OS Sound Support

Begin by verifying that your Operating System recognizes your sound device. If the OS cannot use the device, then Media Center will not be able to use it either.

Windows

To open the Windows Sound Control Panel:

  • Hit Start and type Sound. Choose the Sound Control Panel from the list.
  • Or open the Desktop's Control Panel > Hardware and Sound > Sound.

Then on the Playback tab, select your audio device from the list, and hit the Properties button. On the Advanced tab of the Properties dialog, play the test tones and ensure that you can hear them. Remember the name of the sound device you use so that you can select it in Media Center.

If you aren't able to get sound in Windows, you will need to solve that problem before you continue. Microsoft has a Troubleshooting Guide that may help you.

OSX

In the OSX System Preferences app, open the Sound preference panel, and select your sound device on the Output tab. You can test the device by clicking on one of the alert sounds from the Sound Effects tab. Remember the name of the sound device you use so that you can select it in Media Center.

If you aren't able to get sound in OSX, you will need to solve that problem before you continue. If you are using a third-party sound device, you may need to obtain drivers from the device manufacturer before it will operate.

Audio Output Settings

In Media Center, select the sound device and Audio Output Mode via Tools > Options > Audio > Audio Device. Under the drop-down menu button, you'll find each of your installed Audio Devices listed, with what MC detected as the best Audio Output Mode.

Choose your Audio Device and Output Mode here.

Alternative configurations are available under the More menu. To learn how to choose the proper mode, refer to:

If you aren't sure what to use, try the Direct Sound version (on Windows) or the CoreAudio version (Mac OSX) first, and after you get that working well, you can explore other options.

Other Audio Options

There are a number of other Audio Options available, which are described in other sections of this Wiki. For now, it is best to leave these options at the defaults, and only change options as is required. Get audio playback working first, and then you can tweak it for optimal quality or to enable advanced features.

Output Format

Open DSP Studio, and click on Output Format. Make sure it's enabled by checking the box next to Output Format.

MC19-DSP-Output Format.png

Then, select these settings:

Output Encoding

For most users, this should be set to None. If you have an external DAC that will do further processing, and which requires a specific input type, you can enable formatting options here for compatibility with your specific device.

Note: If set to something other than None, this will re-encode all audio output by Media Center to the format selected. If you are trying to pass specific audio formats through directly to an external DAC, this is not the correct setting. That setting is called Bitstreaming and is set in Tools > Options > Audio > Settings.

Sample rate

You only need to configure this if you play sample rates that are not supported by your hardware. For now, leave it set to defaults.

Channels

Set the Channels selection to the number of outputs you are using from your computer. This is usually the same as the number of speakers you have attached. So for a 5.1 setup, select 5.1. For headphones, select 2 channels. For desk speakers, pick 2 or 4 channels.

Leave mixing set to JRSS v2.0 for the best quality output.

Bitdepth

In older versions of Media Center, you'd set the Bitdepth setting explicitly here. Modern versions of Media Center set this automatically. If you are still using a version of Media Center that provides this option in the DSP Studio, select the same format you used above in the OS setup (which should typically be the highest bitdepth your device supports). Learn more about Audio Bitdepth.

Subwoofer

Leave default settings for now.

Test

At this point, you should be able to play audio with Media Center. Start with simple tests like an MP3, APE, FLAC, or WAV played from a local hard drive.

If this works, move on to more complex playback like Library Server Client, DLNA, Internet radio, etc.

Troubleshooting

If your test fails, but you are able to play the test sounds via the Windows Sound Control Panel or OSX Sound System Preferences panel (referenced above), refer to the Audio Troubleshooting Guide for further assistance. You can also ask for help on our Interact forum.

Refining Audio Settings

Once everything is working, you can use the DSP Studio to improve and enhance your sound. Among other options, you can add:

There are also a variety of Audio Playback Options under Tools > Options > Audio which can be used to adjust things like:

More