Difference between revisions of "Audio Setup"

From JRiverWiki
Jump to: navigation, search
(More)
 
(46 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Configuring Audio Playback in Media Center==
+
This guide provides an overview of how to configure audio playback in JRiver Media Center.  Please follow the steps below in order.
 +
 
 +
== OS Sound Support ==
 +
 
 +
Begin by verifying that your Operating System recognizes your sound device.  If the OS cannot use the device, then Media Center will not be able to use it either.
 +
 
 +
<gallery widths=360px heights=300px>
 +
File:Control_panel_sounds.jpg
 +
File:OSX-SysPref-Sound-Output.png
 +
</gallery>
 +
 
 +
=== Windows ===
 +
 
 +
To open the Windows Sound Control Panel:
 +
* Hit Start and type <tt>Sound</tt>.  Choose the Sound Control Panel from the list.
 +
* ''Or'' open the Desktop's <span style="color:#007A62">Control Panel > Hardware and Sound > Sound</span>.
 +
 
 +
Then on the ''Playback'' tab, select your audio device from the list, and hit the '''Properties''' button.  On the ''Advanced'' tab of the Properties dialog, play the test tones and ensure that you can hear them.  Remember the name of the sound device you use so that you can select it in Media Center.
  
This guide provides an overview of how to configure audio playback in JRiver Media CenterPlease follow the steps below in order.
+
If you aren't able to get sound in Windows, you will need to solve that problem before you continue[http://windows.microsoft.com/en-us/windows/no-sound-help Microsoft has a Troubleshooting Guide] that may help you.
  
==Windows==
+
=== OSX ===
  
Begin by verifying that Windows recognizes your sound cardIf Windows cannot use the device, Media Center will not work.
+
In the OSX '''System Preferences''' app, open the '''Sound preference''' panel, and select your sound device on the ''Output'' tabYou can test the device by clicking on one of the alert sounds from the ''Sound Effects'' tab.  Remember the name of the sound device you use so that you can select it in Media Center.
  
In Control Panel > Sound, play test tones to ensure that you can hear them.
+
If you aren't able to get sound in OSX, you will need to solve that problem before you continue.  If you are using a third-party sound device, you may need to obtain drivers from the device manufacturer before it will operate.
  
[[Image:Control_panel_sounds.jpg]]
+
== Audio Output Settings ==
  
Remember the name of the sound device you use so that you can select it in Media Center.
+
In Media Center, select the sound device and Audio Output Mode via <span style="color:#8B4513">Tools > Options > Audio > Audio Device</span>.  Under the drop-down menu button, you'll find each of your installed Audio Devices listed, with what MC detected as the best Audio Output Mode.
  
==Audio Output Mode==
+
[[File:MC19-Options-Audio-Audio Device.png|thumb|none|600px|Choose your Audio Device and Output Mode here.]]
  
In Media Center > Options > Audio, select the best audio output mode for your hardware.
+
Alternative configurations are available under the ''More'' menu.  To learn how to choose the proper mode, refer to:
 +
* [[Audio Output Modes]]
  
Read more about this here:
+
If you aren't sure what to use, try the ''Direct Sound'' version (on Windows) or the CoreAudio version (Mac OSX) first, and after you get that working well, you can explore other options.
[[Audio Output Modes]]
 
  
In Options > Audio > Output mode settings..., select the name of the device you used in the 'Windows' step above.
+
=== Other Audio Options ===
  
 +
There are a number of other Audio Options available, which are described in other sections of this Wiki.  '''For now, it is best to leave these options at the defaults, and only change options as is required.'''  Get audio playback working first, and then you can tweak it for optimal quality or to enable advanced features.
  
==Output Format==
+
== Output Format ==
  
Open DSP Studio, and click on Output Format.  Make sure it's enabled by checking the box next to Output Format.
+
Open [[DSP Studio]], and click on Output Format.  Make sure it's enabled by checking the box next to '''Output Format'''.
  
[[Image:Output_settings.jpg|600px]]
+
[[File:MC19-DSP-Output Format.png|thumb|none|700px]]
  
 
Then, select these settings:
 
Then, select these settings:
  
'''Sample rate'''
+
=== Output Encoding ===
 +
 
 +
For most users, this should be set to ''None''.  If you have an external DAC that will do further processing, and which ''requires'' a specific input type, you can enable formatting options here for compatibility with your specific device.
 +
 
 +
:'''''Note''''': If set to something other than ''None'', this will re-encode '''all''' audio output by Media Center to the format selected. If you are trying to pass specific audio formats through directly to an external DAC, this is not the correct setting. That setting is called Bitstreaming and is set in <span style="color:#8B4513">Tools > Options > Audio > Settings</span>.
  
You only need to configure this if you play sample rates that are not supported by your hardware.  For now, leave it on no resampling.
+
=== Sample rate ===
  
'''Channels'''
+
'''You only need to configure this if you play sample rates that are not supported by your hardware.''' For now, leave it set to defaults.
  
Set the channels selection to the number of outputs you are using from your computer.  This is usually the same as the number of speakers you have attached.  So for a 5.1 setup, select 5.1.  For headphones, select 2 channels.  For desk speakers, pick 2 or 4 channels.
+
=== Channels ===
 +
 
 +
Set the '''Channels''' selection to the ''number of outputs you are using from your computer''.  This is usually the same as the number of speakers you have attached.  So for a 5.1 setup, select 5.1.  For headphones, select 2 channels.  For desk speakers, pick 2 or 4 channels.
  
 
Leave mixing set to JRSS v2.0 for the best quality output.
 
Leave mixing set to JRSS v2.0 for the best quality output.
  
'''Bitdepth'''
+
=== Bitdepth ===
  
Select the highest bitdepth your hardware supports (usually 24-bit).  Learn more about [[Audio Bitdepth]].
+
In older versions of Media Center, you'd set the Bitdepth setting explicitly here.  Modern versions of Media Center set this automatically.  If you are still using a version of Media Center that provides this option in the DSP Studio, select the same format you used above in the OS setup (which should typically be the highest bitdepth your device supports).  Learn more about [[Audio Bitdepth]].
  
'''Subwoofer'''
+
=== Subwoofer ===
  
Leave default settings
+
Leave default settings for now.
  
==Test==
+
== Test ==
  
 
At this point, you should be able to play audio with Media Center.  Start with simple tests like an MP3, APE, FLAC, or WAV played from a local hard drive.
 
At this point, you should be able to play audio with Media Center.  Start with simple tests like an MP3, APE, FLAC, or WAV played from a local hard drive.
Line 55: Line 79:
 
If this works, move on to more complex playback like Library Server Client, DLNA, Internet radio, etc.
 
If this works, move on to more complex playback like Library Server Client, DLNA, Internet radio, etc.
  
==Room Correction==
+
== Troubleshooting ==
  
Once everything is working, you can use Room Correction to improve the sound.
+
If your test fails, but you are able to play the test sounds via the Windows Sound Control Panel or OSX Sound System Preferences panel (referenced above), refer to the [[Audio Troubleshooting Guide]] for further assistance.  You can also ask for help on our [http://yabb.jriver.com/interact/ Interact forum].
  
Open DSP Studio, and click on Room Correction.  Make sure it's enabled by checking the box next to Room Correction.
+
== Refining Audio Settings ==
  
Then, set the speaker distances for all the speakers you use.
+
Once everything is working, you can use the [[DSP Studio]] to improve and enhance your sound.  Among other options, you can add:
 +
* [[Room Correction]]
 +
* EQ via an advanced [[Parametric Equalizer]]
 +
* Enable [[Adaptive Volume]] and [[Volume Leveling]]
 +
* Add [[Convolution]] filters to dial in your sound system with precision.
 +
* and much more!
  
Next, play something that uses all the speakers.
+
There are also a variety of [[Audio Playback Options]] under <span style="color:#8B4513">Tools > Options > Audio</span> which can be used to adjust things like:
 
+
* Crossfade and Seeking behavior
While playing, go through each speaker and tick the 'Level' checkbox at the bottom of the Room Correction page.  Adjust the volume sliders until the level tones played by all speakers are the same volume.  A decibel meter is best for this stage, but there are also apps that can use the microphone in your phone.  You can also calibrate by ear and get passable results.
+
* [[Volume]] mode and options
 
+
* [[Bitstreaming]]
Finally, if you would like low frequencies to be routed to your subwoofer (bass management), configure the bass redirection portion of Room Correction for each speaker.
 
  
 
==More==
 
==More==
  
 +
* [[Audio Troubleshooting Guide]]
 
* [[Audio_Output_Modes|Audio Output Modes]]
 
* [[Audio_Output_Modes|Audio Output Modes]]
 
* [[DAC_Settings|DAC Settings]]
 
* [[DAC_Settings|DAC Settings]]
 
* [[Audio Bitdepth]]
 
* [[Audio Bitdepth]]
 
* [[Audiophile Info]]
 
* [[Audiophile Info]]
* [[Audio Playback Problems]]
 
 
* [[Mixing]]
 
* [[Mixing]]
* [[Sound Problems]]
+
* [[DSD]]
 +
 
  
[[Category: Frequently Asked Questions]]
+
[[Category:Frequently Asked Questions]]
[[category:Audio]]
+
[[Category:Audio]]
 +
[[Category:Setup]]
 +
[[Category:Tutorials]]
 +
[[Category:DSD]]

Latest revision as of 08:42, 20 September 2021

This guide provides an overview of how to configure audio playback in JRiver Media Center. Please follow the steps below in order.

OS Sound Support

Begin by verifying that your Operating System recognizes your sound device. If the OS cannot use the device, then Media Center will not be able to use it either.

Windows

To open the Windows Sound Control Panel:

  • Hit Start and type Sound. Choose the Sound Control Panel from the list.
  • Or open the Desktop's Control Panel > Hardware and Sound > Sound.

Then on the Playback tab, select your audio device from the list, and hit the Properties button. On the Advanced tab of the Properties dialog, play the test tones and ensure that you can hear them. Remember the name of the sound device you use so that you can select it in Media Center.

If you aren't able to get sound in Windows, you will need to solve that problem before you continue. Microsoft has a Troubleshooting Guide that may help you.

OSX

In the OSX System Preferences app, open the Sound preference panel, and select your sound device on the Output tab. You can test the device by clicking on one of the alert sounds from the Sound Effects tab. Remember the name of the sound device you use so that you can select it in Media Center.

If you aren't able to get sound in OSX, you will need to solve that problem before you continue. If you are using a third-party sound device, you may need to obtain drivers from the device manufacturer before it will operate.

Audio Output Settings

In Media Center, select the sound device and Audio Output Mode via Tools > Options > Audio > Audio Device. Under the drop-down menu button, you'll find each of your installed Audio Devices listed, with what MC detected as the best Audio Output Mode.

Choose your Audio Device and Output Mode here.

Alternative configurations are available under the More menu. To learn how to choose the proper mode, refer to:

If you aren't sure what to use, try the Direct Sound version (on Windows) or the CoreAudio version (Mac OSX) first, and after you get that working well, you can explore other options.

Other Audio Options

There are a number of other Audio Options available, which are described in other sections of this Wiki. For now, it is best to leave these options at the defaults, and only change options as is required. Get audio playback working first, and then you can tweak it for optimal quality or to enable advanced features.

Output Format

Open DSP Studio, and click on Output Format. Make sure it's enabled by checking the box next to Output Format.

MC19-DSP-Output Format.png

Then, select these settings:

Output Encoding

For most users, this should be set to None. If you have an external DAC that will do further processing, and which requires a specific input type, you can enable formatting options here for compatibility with your specific device.

Note: If set to something other than None, this will re-encode all audio output by Media Center to the format selected. If you are trying to pass specific audio formats through directly to an external DAC, this is not the correct setting. That setting is called Bitstreaming and is set in Tools > Options > Audio > Settings.

Sample rate

You only need to configure this if you play sample rates that are not supported by your hardware. For now, leave it set to defaults.

Channels

Set the Channels selection to the number of outputs you are using from your computer. This is usually the same as the number of speakers you have attached. So for a 5.1 setup, select 5.1. For headphones, select 2 channels. For desk speakers, pick 2 or 4 channels.

Leave mixing set to JRSS v2.0 for the best quality output.

Bitdepth

In older versions of Media Center, you'd set the Bitdepth setting explicitly here. Modern versions of Media Center set this automatically. If you are still using a version of Media Center that provides this option in the DSP Studio, select the same format you used above in the OS setup (which should typically be the highest bitdepth your device supports). Learn more about Audio Bitdepth.

Subwoofer

Leave default settings for now.

Test

At this point, you should be able to play audio with Media Center. Start with simple tests like an MP3, APE, FLAC, or WAV played from a local hard drive.

If this works, move on to more complex playback like Library Server Client, DLNA, Internet radio, etc.

Troubleshooting

If your test fails, but you are able to play the test sounds via the Windows Sound Control Panel or OSX Sound System Preferences panel (referenced above), refer to the Audio Troubleshooting Guide for further assistance. You can also ask for help on our Interact forum.

Refining Audio Settings

Once everything is working, you can use the DSP Studio to improve and enhance your sound. Among other options, you can add:

There are also a variety of Audio Playback Options under Tools > Options > Audio which can be used to adjust things like:

More