DAC Settings: Difference between revisions

Revision as of 14:55, 9 September 2013

Media Center has industry leading support for high-end DACs (Digital to Analog Converters).

For the best quality playback with high-end DACs, use these recommended settings:

Options > Playback > Audio > Output Mode

Media Center Windows

You will need to select the best audio output mode for your device in Options > Audio.

With Media Center Windows version 15 and above, use "WASAPI - Event Style".

With older versions of Media Center Windows, use "WASAPI".

Note that some DACs listed below offer native ASIO drivers that may be better than WASAPI.

Media Center Mac

Use "Core Audio".

Options > Playback > Audio > Output mode settings...

Media Center Windows

Inside "Output mode settings..." for WASAPI, use the following settings:

Open device for exclusive access: Checked

Present 24-bit data in a 32-bit package: Unchecked

Buffering: 100ms (assuming WASAPI - Event Style). If you hear audio hiccups or drop-outs, increase this size.

DSP Studio > Output Format

You will also need to choose the output format using DSP Studio. These settings are recommended:

Bitdepth: 24-bit (most DACS prefer and even require 24-bit input)

Channels: Source number of channels

Sample rate: Depends (with an outboard DAC, try "Source sample rate")

Audio Research DAC8. Install Audio Research's DAC8 drivers (ASIO) on the PC, and select ASIO in MC15, then select the DAC8.

Revision as of 14:46, 9 September 2013 (view source) Johnt (talk \| contribs) (→‎Recommended Settings) ← Older edit		Revision as of 14:55, 9 September 2013 (view source) Johnt (talk \| contribs) (→‎Recommended Settings) Newer edit →
Line 2:		Line 2:


	== Recommended Settings ==		== Recommended Settings For Direct Connected DAC's (USB or S/PDIF) ==

	For the best quality playback with high-end DACs, use these recommended settings:		For the best quality playback with high-end DACs, use these recommended settings: