DAC Settings: Difference between revisions

Revision as of 18:21, 6 November 2011

Media Center has industry leading support for high-end DACs (Digital to Analog Converters).

For the best quality playback with high-end DACs, use these recommended settings:

Options > Playback > Audio > Output Mode

You will need to select the best audio output mode for your device in Options > Audio.

With Media Center 15, use "WASAPI - Event Style".

With older versions of Media Center, use "WASAPI".

Note that some DACs listed below offer native ASIO drivers that may be better than WASAPI.

Options > Playback > Audio > Output mode settings...

Inside "Output mode settings..." for WASAPI, use the following settings:

Open device for exclusive access: Checked

Present 24-bit data in a 32-bit package: Unchecked

Buffering: 100ms (assuming WASAPI - Event Style). If you hear audio hiccups or drop-outs, increase this size.

DSP Studio > Output Format

You will also need to choose the output format using DSP Studio. These settings are recommended:

Bitdepth: 24-bit (most DACS prefer and even require 24-bit input)

Channels: Source number of channels

Sample rate: Depends (with an outboard DAC, try "Source sample rate")

Audio Research DAC8. Install Audio Research's DAC8 drivers (ASIO) on the PC, and select ASIO in MC15, then select the DAC8.

@@ Line 9: / Line 9: @@
 '''Options > Playback > Audio > Output Mode'''
-You will need to select the best [http://wiki.jriver.com/index.php/Audio_Output_Mode audio output mode] for your device in Options > Audio.
+You will need to select the best [http://wiki.jriver.com/index.php/Audio_Output_Modes audio output mode] for your device in Options > Audio.
 With Media Center 15, use "WASAPI - Event Style".
@@ Line 38: / Line 38: @@
 Sample rate: Depends (with an outboard DAC, try "Source sample rate")
 == Known to Work With ==