Audio Troubleshooting Guide

further information: Media Center Troubleshooting Guide

A frequent cause of trouble is a misconfigured, or misbehaving, audio device. If you've messed with a bunch of settings in there, or you are using a more esoteric hardware setup, then you might just have to tweak something.

Troubleshooting Steps

1. Work through the Audio Setup Guide
2. Check on a few basics.
3. Disable any DSP items you've enabled, to see if one of them is causing the issue.
4. Check your Audio Device. If you can, try different audio outputs on the computer, to see if one in particular is having issues while others work.
5. Make sure the amplifier or device at the other end (speakers, receiver, DAC, etc) is functioning properly, set to the right inputs, etc.
6. Try another device using the same input on your receiver or speakers to ensure it isn't a problem with your amplification system.

Basics

The first thing to do is check through some basic issues. Even if these don't resolve the issue, they will gather additional basic details about the issue which will be useful when asking for help.

No Sound:

• Is there an audio device installed on the computer? Check Device Manager to ensure there's an audio device and that it is enabled and working.
• Is sound muted? Double click on the speaker icon in the lower right corner of the Windows desktop, and under the Volume button in Media Center.
• Work through the [Audio Setup]] guide.
• If all else fails, try switching to Direct Sound Audio Output Mode (Windows only).

Poor Audio Quality, File Ends Prematurely, or Sound Output is Garbled:

• Try playing the track with an alternative media player. If you don't have a good option, VLC is cross platform and will play almost anything you throw at it.
• Disable "advanced" Audio Options such as Play files from memory, Bitstreaming, and custom Live Latency settings.
• Trouble with Pops and Clicks?

Is the Issue File Specific or File Type Specific?

• See if the problem occurs with files of various types. If you're having trouble with FLAC or AIFF playback, try some MP3s. If audio in a video file doesn't work, try some simple audio files.
• Try to narrow down if the issue occurs with only specific files (regardless of type) or if it applies to all files of a particular type.

DSP Troubleshooting

If you determine the cause is caused by the DSP:

1. Re-enable all of the DSP items you want to use.
2. Disable them one at a time and try to recreate the issue.

Some DSP options require substantial computing horsepower, such as the Convolution Filter. You may find that your computer simply isn't powerful enough to accomplish what you're trying to do (at least with the types of sources you are using). However, it could be a simple misconfiguration. In particular, Output Encoding and Sample Rate settings under the Output Format DSP are a common cause of trouble. In most cases, the best quality will be achieved by leaving these at their defaults.

Showing the MC19 Output Format DSP dialog, with settings typical for using a multichannel (5.1) output device.

Checking for Misbehaving Audio Devices

Removing the Scarlett 2i4 USB Audio Device completely from the system.

If none of the above helps, or if you determine that the problem is related to a particular audio device, a good next step is to disable or physically disconnect any audio devices that might be misbehaving.

You may want to consider this particularly if you are getting crashes immediately when launching MC, or immediately upon playback of an audio file. Sometimes doing this through the Device Manager in Windows works, and sometimes it doesn't, and you must physically remove the device from the PC. With external devices, like USB DACs, unplug it from the PC and try the same thing using the PC's built-in audio.

In some cases, simply removing the device physically, and then booting Windows without the device installed will allow Windows to correct the driver issue. In many other cases, you may want to fully uninstall the device and all of its drivers and then start over from scratch.

To Uninstall the device driver from Windows fully:

1. Go to the Uninstall Programs control panel, and remove all entries related to your audio device.
2. Do not restart when prompted.
3. Click Start and type: Device Manager
4. Hit enter to open the Device Manager.
5. Find the audio device in question under Sound, video and game controllers (be sure not to choose it via the Audio Inputs and Outputs part of Device Manager).
6. Right click on the device and choose Uninstall.
7. In the dialog that appears, check the Delete the driver software for this device option.
8. Click OK to confirm.
9. Shut down the PC and physically remove the offending device.
10. Boot back up "cleanly" once.
11. Obtain the latest version of the drivers for your device from the hardware manufacturer.
12. Shut back down again, and then you can try reinstalling your audio device.

More

• Our Wiki topic, "Weird and Wonderful", has a long list of problems caused by other hardware and software.