MJMixerAutomation

From wiki.jriver.com
Revision as of 23:49, 22 January 2007 by Gateley (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

provides volume, balance, and mute control

Functions

void SetEQBand(number nBand, number nValue)

Description: sets the value of an equalizer band
Parameters:

  • nBand: the equalizer band (0 = preamp, 1 - 10 = eq bands)
  • nValue: the new band value (-100 to 100 where -100 is full cut, 0 is no gain, and 100 is full gain)

number GetEQBand(number nBand)

Description: gets the value of an equalizer band
Parameters:

  • nBand: the equalizer band (0 = preamp, 1 - 10 = eq bands)

Return Value: value of the specified band (-100 to 100 where -100 is full cut, 0 is no gain, and 100 is full gain)

void UpdateEQSettings(number bUpdatePlayer, number bUpdateMiniMe)

Description: updates the internal settings to reflect outside changes (made in DSP Studio, etc.) -- not necessary in most cases
Parameters:

  • bUpdatePlayer: whether to update the player window (0 = no, 1 = yes)
  • bUpdateMiniMe: whether to update the mini-me window (0 = no, 1 = yes)

void ShowDSP()

Description: Activate the DSP

Properties

number Volume() (read / write)

Description: the volume (0 = no volume, 100 = full volume)

number Balance() (read / write)

Description: the balance between left and right (-100 = all left, 0 = centered, 100 = all right)

boolean Mute() (read / write)

Description: the mute state (0 = not muted, 1 = muted)

boolean EQOn() (read / write)

Description: whether the equalizer is on or off (0 = off, 1 = on)