JRVR - JRiver Video Renderer/Configuration

From wiki.jriver.com
Revision as of 11:40, 1 June 2022 by Nevcairiel (talk | contribs)
Jump to navigation Jump to search

JRVR configuration can be accessed through the Media Center Options, under Video -> JRVR Settings...

General

JRVR GeneralSettings.jpg

General JRVR settings, and presets

Quality Presets

You can load a pre-defined quality preset.

  • Performance preset
    Designed for low-end integrated graphics, laptops, and older machines
  • Balanced preset
    A good balance of performance and image quality, designed for high-end integrated graphics or mid-range dedicated graphics
  • Quality preset
    High quality video rendering, requires a fast dedicated graphics card

Advanced Mode

JRVR offers a variety of advanced options, which offer detailed control over the video rendering process, these, however, are not required even for high-quality video playback, and are only recommended for experienced users. Enabling Advanced Mode will unlock additional options, as well as give more detailed control over existing options.

Only recommended for experienced users.

Output

The Output settings specify the processing of the image specific to your screen.

JRVR OutputSettings.jpg

HDR (High Dynamic Range)

HDR is a video technology which increases the perceived contrast of an image by offering brighter highlights without sacrificing black level. To fully make use of HDR, a screen with HDR support is required, otherwise the video will be converted to normal brightness levels during playback.

The settings dialog will indicate if your screen reports to be HDR capable, and if HDR is currently active. If HDR is supported, but not active, JRVR can turn HDR mode on when playing a HDR video, which is the recommended mode of operation.

  • Use the display's HDR capability for HDR videos (if available)
    Enabling this option allows JRVR to pass HDR content directly to a HDR capable screen, making use of the HDR functionality in the screen to improve the dynamic range.
  • Automatically switch to HDR mode when starting playback (recommended)
    When playing a HDR video, the screen needs to be in HDR mode to handle the video - JRVR will automatically enable this mode as required.

Calibration

  • Screen Gamut
    The gamut your screen is configured to expect. For most displays, Auto or BT.709 will be the right choice. This is independent of the video you are playing, and should be set to the screens native gamut.
  • Calibration Method
    JRVR supports calibration the image to your screen through either an ICC profile, or a 3DLUT. ICC profiles are loaded through the OS, while 3DLUTs will be loaded by JRVR.

Scaling

Upscaling

  • Algorithm
    Select the main image scaling algorithm. The quality/performance changes roughly from top to bottom, from faster to higher quality.
  • Scale in Sigmoidal Light
    Scaling in Sigmoidal Light helps to reduce ringing artifacts when upscaling
  • SuperRes Enhancement
    SuperRes is an algorithm to refine the image after upscaling, improving sharpness and reducing scaling artifacts

Upscaling / Advanced Scaling

Advanced Scaling uses custom algorithms to improve the image upscaling at the cost of performance. These algorithms should only be enabled with a decent graphics card. Luma (Image brightness) and Chroma (Image color) are scaled independently here, and offer different algorithms to test.

Downscaling

Just as Upscaling, the same algorithms are available. However, no advanced scaling is currently supported for downscaling.


Advanced

Dithering

  • Algorithm
    The Dithering Algorithm to use. We recommend using Blue Noise, as it produces the least invasive Noise in the image. Whit Noise is the fastest and noisiest, and Ordered Dithering is a decent compromise between quality and performance, but can result in visible pattern on some screens.

Trade Quality for Performance

  • Allow delayed HDR peak detection
    Delayed peak detection can result in peak information being supplied one frame later, which allows the peak detection to be more efficient in some cases at the cost of less-smooth brightness changes.